Neck/Fretboard radius: Repost from A Barfield

[ChrisClark]

Would you happen to know the radii used for the fretboard and neck in the Time advance 3's? Also the width at nut and 22nd fret?

[ChrisClark]

Thanks for posting.

The Advance 3's have a 9" radius, as all 25 1/2" scale Time Guitars. The 24 1/2" scale guitars have a 12" radius.
This is the fretbroad radius. The Neck radius [back of the neck, I'm guessing] is a lot more complicated and beyond this post.
When I have time I'll measure my AT-3 and post.
All Time Guitars have the same neck widths, 24 1/2' or 25 1/2" scale length.
The shape and dimensions of the Time guitar necks were not changed since I can remember.
As I said, when I have more time I'll measure the neck width and post.

And again, A Barfield, Thanks
Chris

[ChrisClark]

Neck Dimensions.
On my AT-3 #424 [with the finish on]:

Nut 1.69" x 0.81"
12th 2.06" x 0.93"
22nd 2.23"

Every Time guitar neck has these same dimensions.

On the 25 1/2" scale guitar the measure is taken at the 22nd fret and on the 24 1/2" scale the same measurement is found at the 24th fret.
The length of the fretboard from the nut to the 23nd fret on a 25 1/2" scale is within a 1/16" of the length of a 24 1/2" scale measured from the nut to the 25th fret. The 23rd and 25th fret here are actually the end of the fingerboard.
Confused? It's magic I tell you!

-Chris